激変なネット情報時代で、質の良いInternational Code CouncilのFire-Inspector-II問題集を見つけるために、あなたは悩むことがありませんか。私たちは君がCertJukenを選ぶことと正確性の高いInternational Code CouncilのFire-Inspector-II問題集を祝っています。CertJukenのInternational Code CouncilのFire-Inspector-II問題集が君の認定試験に合格するのに大変役に立ちます。
他の人はあちこちでInternational Code Council Fire-Inspector-II試験資料を探しているとき、あなたはすでに勉強中で、準備階段でライバルに先立ちます。また、我々CertJukenは量豊かのInternational Code Council Fire-Inspector-II試験資料を提供しますし、ソフト版であなたにInternational Code Council Fire-Inspector-II試験の最も現実的な環境をシミュレートさせます。勉強中で、何の質問があると、メールで我々はあなたのためにすぐ解決します。心配はありませんし、一心不乱に試験復習に取り組んでいます。
Fire-Inspector-II試験ガイドには、高品質のサービスがあります。 24時間のオンラインサービスを提供しています。 Fire-Inspector-II試験問題の使用中に質問がある場合は、メールでお問い合わせください。 私たちInternational Code Councilは最大限の忍耐と態度で優れたアフターサービスを提供します。 そして、Fire-Inspector-II練習用トレントの使用中に発生する問題に対する詳細な解決策を提供します。 そして、Fire-Inspector-IIの学習資料は、あなたの監督と批判を歓迎します。 私たちのFire-Inspector-II学習教材の会社で、あなたは67 - Fire Inspector II Exam成功の方向を見つけるでしょう。
質問 # 46
Atmospheric tanks with hazardous materials shall be equipped with a liquid-level limit control if they have a capacity which is greater than __ gallons.
正解：D
解説：
Reference to Liquid-Level Limit Control Requirements for Atmospheric Tanks:
According to The International Fire Code (IFC 2021), Section 5704.2.7.5, atmospheric tanks containing hazardous materials must be equipped with a liquid-level limit control if their capacity exceeds 500 gallons.
This requirement ensures that overfilling is prevented, reducing the risk of hazardous spills, leaks, and fire hazards.
Purpose of Liquid-Level Limit Controls:
These controls automatically shut off or alert operators when the liquid level reaches a predetermined limit.
They prevent tank overfill and reduce the risk of hazardous material release, which can cause fires, explosions, or environmental contamination.
Clarification of Incorrect Answer Choices:
A: 55 gallons # Incorrect
55-gallon drums are not subject to the same overfill protection requirements as large atmospheric tanks.
B: 100 gallons # Incorrect
Too low based on IFC 5704.2.7.5, which sets the requirement at 500 gallons.
C: 250 gallons # Incorrect
Some local regulations may require monitoring for tanks of this size, but IFC specifies 500 gallons as the mandatory threshold.
Conclusion:
The correct and verified answer is D (500 gallons) based on IFC 5704.2.7.5, ensuring proper overfill protection for atmospheric tanks containing hazardous materials.
質問 # 47
The minimum working space width for a 66-in. wide electrical equipment panel shall be in
正解：C
解説：
Minimum Working Space Width for Electrical Equipment Panels
According to National Electrical Code (NEC) 110.26(A)(2) and International Fire Code (IFC) 2021, Section
604.3, the minimum working space width for electrical equipment must be at least the width of the equipment or 30 inches, whichever is greater.
Since the equipment panel in the question is 66 inches wide, the required working space width must be at least 66 inches.
2. Why 66 Inches is the Correct Answer
The minimum clearance width must be equal to the width of the electrical equipment if the panel itself is wider than 30 inches.
This ensures safe maintenance and emergency access to electrical components.
3. Verification of Other Options
Option A (30 inches) - Incorrect, because the equipment is wider than 30 inches, requiring a larger clearance.
Option B (36 inches) - Incorrect, as this is not the requirement for a 66-inch-wide panel.
Option D (78 inches) - Incorrect, as the clearance does not need to exceed the width of the panel.
Reference Sources:
National Electrical Code (NEC) 2023 - Section 110.26(A)(2) (Working Space Width Requirements) International Fire Code (IFC) 2021 - Section 604.3 (Electrical Equipment Clearance Requirements) ICC Fire Inspector II Study Guide (2021)
質問 # 48
Foamed plastics or materials containing foamed plastics used for stage scenery must be approved when tested in accordance with
正解：A
解説：
Foamed plastics or materials containing foamed plastics used for stage scenery must meet strict fire performance requirements to prevent rapid flame spread and fire hazards in assembly occupancies.
The correct fire test standard for these materials is UL 1975 - Standard for Fire Tests for Foamed Plastics Used for Decorative Purposes.
Reference to Fire Inspector Documentation:
1. 2021 International Fire Code (IFC) - Section 807.4.2 (Foamed Plastics for Stage Scenery) IFC 807.4.2 states that foamed plastics used in scenery must be tested and approved per UL 1975 to ensure fire safety.
2. UL 1975 - Standard for Fire Tests for Foamed Plastics Used for Decorative Purposes This standard evaluates the flammability and smoke production of foamed plastics used in decorative applications, including stage scenery.
Detailed Explanation of Answer Choices:
Option A (Correct): UL 1975 is the required test standard for foamed plastics used in stage scenery, ensuring compliance with IFC 807.4.2.
Option B (Incorrect): NFPA 11A deals with foam-water fire suppression systems, not foamed plastics for decorative use.
Option C (Incorrect): CPSC 16CFR relates to consumer product safety regulations but does not address fire safety for foamed plastics on stage scenery.
Option D (Incorrect): ASTM D 1784 is a test for rigid PVC plastics and does not apply to foamed plastics used for stage scenery.
Thus, the correct and verified answer is: A. UL 1975.
質問 # 49
One or more approved fire extinguishers must be located within __ ft. of hot work locations.
正解：D
解説：
Fire Extinguisher Requirements for Hot Work Locations
According to the International Fire Code (IFC) 2021, Section 3504.2.6, one or more approved fire extinguishers must be located within 30 feet of hot work locations.
Hot work includes welding, cutting, grinding, brazing, or any operation that generates heat, sparks, or flames.
2. Why 30 Feet is the Correct Answer
Hot work presents a high fire risk, and quick access to fire extinguishers is crucial for immediate response.
The 30-foot requirement ensures that extinguishers are readily accessible without obstructing the work area.
3. Verification of Other Options
Option A (20 feet) - Incorrect, as the IFC mandates a 30-foot minimum distance.
Option C (40 feet) - Incorrect, as this exceeds the maximum distance allowed under the fire code.
Option D (50 feet) - Incorrect, as fire extinguishers must be closer to provide effective fire suppression.
Reference Sources:
International Fire Code (IFC) 2021 - Section 3504.2.6 (Fire Extinguishers for Hot Work) NFPA 51B: Standard for Fire Prevention During Welding, Cutting, and Other Hot Work ICC Fire Inspector II Study Guide (2021) Thus, the correct and verified answer is: B. 30 feet. #
質問 # 50
How long should the fire prevention bureau maintain fire inspection records on a commercial structure?
正解：C
解説：
Retention of Fire Inspection Records
The International Fire Code (IFC) and NFPA 1 specify that records related to fire inspections, violations, and compliance must be maintained for the lifetime of the building.
This ensures a continuous history of inspections, violations, and fire prevention measures, which is critical for enforcement, legal action, and future compliance reviews.
2. Verification of Other Options
Option B (A maximum of five years) - This is incorrect because fire records must be retained longer than five years to ensure historical tracking of fire hazards and compliance over the lifespan of a structure.
Option C (Until the building is renovated or has a change of occupancy) - Renovation or occupancy change does not eliminate past fire risks, so previous records must still be maintained. Incorrect.
Option D (At least one year or until the next fire inspection, whichever is later) - This timeframe is too short and does not comply with NFPA 1 and IFC record-keeping requirements. Incorrect.
Reference Sources:
International Fire Code (IFC) 2021 - Section 104.6 (Records)
NFPA 1: Fire Code (Records Retention Requirements)
ICC Fire Inspector II Study Guide (2021)
質問 # 51
......
最短時間でFire-Inspector-II試験に合格すると、CertJukenすべての受験者の声になります。 しかし、圧倒的な学習教材で最も価値のある情報を選択する方法は、すべての試験官にとって頭痛の種です。 絶え間ない努力の後、Fire-Inspector-II学習ガイドは誰もが期待するものです。 当社の専門家は、コンテンツを簡素化し、お客様の重要なポイントを把握するだけでなく、Fire-Inspector-II準備資料を簡単な言語に再コンパイルしました。レジャー学習体験と、今後のFire-Inspector-II 試験67 - Fire Inspector II Exam合格できます。
Fire-Inspector-II勉強方法: https://www.certjuken.com/Fire-Inspector-II-exam.html
しかし、CertJukenから本当のFire-Inspector-II試験のトレーニング資料は、あなたのFire-Inspector-II認定試験に合格するのを助けることができます、International Code Council Fire-Inspector-II絶対合格 専門家チームによって真面目に設計される３種類の試験トレーニングがあなたに用意されています、弊社の従業員はすでにFire-Inspector-II勉強方法 - 67 - Fire Inspector II Exam学習資料の三つバージョンを開発しました、受験生がみんなFire-Inspector-IIの認定試験に合格したいですが、試験の準備をするための良い勉強法を見つけることができないということがあります、CertJukenのFire-Inspector-II試験トレントの合格率は、効果的で有用を証明する唯一の基準であるというのは常識です、International Code Council Fire-Inspector-II絶対合格 近年、あなたと私たちの共同努力により、合格率は99.8％に達しました。
あ） この船は只今よりルーファス海賊団が占拠するよ（ふあふ 敵の親分を人質に取るなんて、なんて卑怯な方法だ、ないな 河川敷の方では今晩、夜間係留イベントがあるってさ、しかし、CertJukenから本当のFire-Inspector-II試験のトレーニング資料は、あなたのFire-Inspector-II認定試験に合格するのを助けることができます。
専門家チームによって真面目に設計される３種類の試験トレーニングがあなたに用意されています、弊社の従業員はすでに67 - Fire Inspector II Exam学習資料の三つバージョンを開発しました、受験生がみんなFire-Inspector-IIの認定試験に合格したいですが、試験の準備をするための良い勉強法を見つけることができないということがあります。
CertJukenのFire-Inspector-II試験トレントの合格率は、効果的で有用を証明する唯一の基準であるというのは常識です。
Get Answers to your questions directly
Don’t wait—enroll today to get certified in food safety!
🟢 Online | Privacy policy
WhatsApp us
Optimized by Seraphinite Accelerator